Santa Ana, Calif., February 16, 2007 - Rubber-Cal has introduced two new textured rubber matting products: the Coin-Grip and Diamond-Grip rolled rubber matting. Introducing two new products with design roots in the 60's and 70's. The Coin-Grip, with a coin top design, and the Diamond-Grip, with a steel deck design, are reminiscent of flooring found in VW buses or commercial buses. The latter products are designed for a variety of applications like walkways, garage flooring or even that restored 1965 Deluxe Microbus which had Twenty-One Windows and One Sunroof. Coin-Grip: The Coin-Grip offers excellent traction through its coin top rubber stud surface and the naturally high coefficient of friction found in rubber. The raised coin pattern is designed for medium to high traffic areas where added traction is needed. The Coin-Grip is just under an1/8 inch in thickness, sold in a 48 inch width and available in any length up to 50ft. This modern, sleek, low-profile and non-directional look makes the Coin-Grip an excellent choice in rubber flooring. In commercial applications where surface traction from a multi-directional, easy-to-move flooring is required, the Coin-Grip is an excellent aesthetic choice. Diamond-Grip: Our Diamond-Grip offers excellent traction through its non-directional surface and rubber's innate high coefficient of friction. The coarse and embossed surface pattern has a non-directional design making it a perfect industrial traction mat where extra grip is required. The Diamond-Grip's high profile design offers exceptional scraper and wear characteristics, making it ideal for heavy traffic scenarios. Although it is only offered in the 48 inch width, the Diamond-Grip can be purchased in any length. It could also be easily cut using a utility knife on location, to meet almost any dimensional requirement. The Diamond-Grip is just under 1/8 inch in thickness, sold in 48 inch widths and available in any length up to 50ft. For more details about these products, or for pricing for a specific area, please e-mail us at info@rubbercal.com or call a friendly Rubber-Cal Sales associate or product specialist at (800) 370-9152. Press Contact: Josh Krueger 1-714-772-3000 |
Rubber-Cal Engineered Elastomers and Wear Parts |
© 1999-2008 Rubber-Cal All rights reserved. Reproduction of any of the material contained herein in any format or media without the express written permission of Rubber-Cal, Inc. is prohibited. Rubber-Cal, Inc. 3012 South Croddy Way, Santa Ana, CA 92704. Tel 800.370.9152 714.772.3000 Fax 714-772-3088 |
Press Release |
Santa Ana, Calif., February 16, 2007 - Rubber-Cal has introduced two new textured rubber matting products: the Coin-Grip and Diamond-Grip rolled rubber matting. Introducing two new products with design roots in the 60's and 70's. The Coin-Grip, with a coin top design, and the Diamond-Grip, with a steel deck design, are reminiscent of flooring found in VW buses or commercial buses. The latter products are designed for a variety of applications like walkways, garage flooring or even that restored 1965 Deluxe Microbus which had Twenty-One Windows and One Sunroof. Coin-Grip: The Coin-Grip offers excellent traction through its coin top rubber stud surface and the naturally high coefficient of friction found in rubber. The raised coin pattern is designed for medium to high traffic areas where added traction is needed. The Coin-Grip is just under an1/8 inch in thickness, sold in a 48 inch width and available in any length up to 50ft. This modern, sleek, low-profile and non-directional look makes the Coin-Grip an excellent choice in rubber flooring. In commercial applications where surface traction from a multi-directional, easy-to-move flooring is required, the Coin-Grip is an excellent aesthetic choice. Diamond-Grip: Our Diamond-Grip offers excellent traction through its non-directional surface and rubber's innate high coefficient of friction. The coarse and embossed surface pattern has a non-directional design making it a perfect industrial traction mat where extra grip is required. The Diamond-Grip's high profile design offers exceptional scraper and wear characteristics, making it ideal for heavy traffic scenarios. Although it is only offered in the 48 inch width, the Diamond-Grip can be purchased in any length. It could also be easily cut using a utility knife on location, to meet almost any dimensional requirement. The Diamond-Grip is just under 1/8 inch in thickness, sold in 48 inch widths and available in any length up to 50ft. For more details about these products, or for pricing for a specific area, please e-mail us at info@rubbercal.com or call a friendly Rubber-Cal Sales associate or product specialist at (800) 370-9152. Press Contact: Josh Krueger 1-714-772-3000 |
For Immediate Release 02-16-2007 Rubber-Cal Inc., today unveiled new rubber matting products, with an "Old School Feel" |
Printer Friendly .PDF File |
