What better playground ideas than one that takes into account the welfare of the children! With an average of 200,000 children in the U.S. going into emergency room associated with playground equipment, and “most injuries occur when a child falls from the equipment onto the ground,” it is important that you consider an interlocking rubber play area for your playgrounds. Rubber flooring for playgrounds are a product that is fast and effective to install. By buying interlocking rubber mats the consumer is saving money in multiple ways. They are saving money because interlocking mats are Do-It-Yourself, so there is no need to pay contractors or installers. In addition adhesives are not needed and when purchasing a rubber playground mat the play area flooring can be assembled in day! All they need to worry about is where they are going to install them. Lastly, when considering flooring for playgrounds an added benefit of interlocking rubber play area is that they are durable. Being made from recycled tires they are able to take a large amount of abuse. Interlocking mats are one of the best wonderful playground ideas!
Continue Reading Below
Great Playground Ideas: Install An Interlocking Playground Mat
Playground Ideas #1 Fast and Effective Installation
A rubber play area is a fast and effective way in ensuring that all of your playground ideas come together starting with the floors An interlocking playground mat is the ideal Do It Yourself flooring project because they are very quick and easy to install. The first step in the installation process for interlocking flooring for playgrounds is to determine exactly how many tiles you will require in order to cover the play area. An interlocking playground mat can be installed through the use of connector pins, but there are some interlocking playground mats that are connected like a puzzle. Each interlocking mat usually has holes that are placed along the four sides of the mat. To install the tiles all one has to do is insert the connector pins into each hole and line one rubber tile up to another and push together. A rubber mallet can be used to make the installation process easier, but it is not always necessary. Once you have two interlocking tiles put together all you have to do is repeat the same process until your decided area is covered. As an added tip to making sure you are optimizing each tile’s use, it is a good idea to place your starting tile along a corner to line the interlocking tiles up. Since interlocking tiles are made to turn any play area into a simple and easy rubber play area this product is made for a single person to accomplish with ease or a group of friends who would like a project on a Saturday afternoon. For your playground there is no better option that is as fast and effective as a rubber play area. Rubber interlocking tiles are the perfect safety solution as flooring for playgrounds because rubber is a much safer material than concrete or asphalt.
Playground Ideas #2 Save Money
Since creating a rubber play area is essentially a Do It Yourself project, they were made to save the consumer money. The way that interlocking rubber flooring for playgrounds can save the consumer money is by eliminating the need for any additional products and services to go along with the material. If one buys a playground mat, whatever product comes with it is all they really need. There is no need to buy any added glue to keep the tiles down because they tend to be heavy enough to stay in place by themselves. A 5-gallon bucket of glue that is used to adhere rubber onto specific surfaces can cost an average of $270. It is also important to keep in mind that not all glue will work with all different types of rubber. It would be a costly mistake to purchase the incorrect adhesive and apply it to an interlocking rubber playground mat, only to realize it does not work. Even worse, perhaps the adhesive will damage the rubber tiles by attacking the binder in the tiles. This has happened before!
Bringing playground ideas to life especially with regards to flooring, can be very expensive. The benefit to buying Do It Yourself products such as interlocking rubber tiles is that there is no need to pay contractors or installers. The average cost that a contractor or installer is going to charge a client for installing 100 square feet of rubber tiles is approximately around $900 according to Homewyse.com. That is money that could go into other playground ideas that the owner may be considering. The consumer is also saving money because they do not need to pay for products to maintain a rubber play area. One advantage of an interlocking playground mat when compared to loose-fill material like sand, woodchips, or rubber mulch is that there is no need to constantly refill the play area. When a consumer chooses rubber flooring for playgrounds they can be relieved that they are going to save money.
Playground Ideas#3 Durability
A rubber interlocking playground mat that is made out of recycled rubber can be used for the outdoors. Interlocking mats that are used to build a rubber play area are durable and have long lifespan. Since rubber flooring for playgrounds are made for the outdoors they are resilient against different types of climates. An Interlocking playground mat is created to be UV resistant since its made from recycled tires. These rubber mats will not fade or discolor when they are out in the sun. They are also made to be frost proof, they will not separate and break a part when it gets to cold, which is a common characteristic or pour in rubber. Another testament to rubber flooring for playgrounds durability is that they are water resistant as well, the consumer can take pleasure in know that there will be no damage from basic liquid spills. The advantage of having rubber interlocking mats as the material for your playground ideas flooring is that they can withstand a large amount of weight. They can also withstand a high amount of foot-traffic without the material being damaged. Because rubber flooring for playgrounds is durable and able to withstand a large amount of abuse it is your ultimate choice for protecting children from injury. An interlocking rubber play area that is rated with a 6 feet fall height rating, which makes the playground mat not only durable, but dependable. Their durability is also the reason why people who want their playground ideas to be a long-term investment, purchase rubber flooring for playgrounds. A rubber play area can withstand and accommodate children who are in wheelchairs that did not have the ability to enjoy the playground with loose-fill material. They are also sturdy and safe enough to be the flooring for playgrounds that also function as skate parks.
If you are looking for flooring for playgrounds, for your playground ideas, that are also fast and effective and can be done by yourself or with a group of friends, then you should consider an interlocking rubber play area. Interlocking rubber mats are simple and easy to install. They only requires three easy steps:
- Insert the connector pins into interlocking playground mat.
- Line it up with another rubber interlocking mat.
- Push them together.
Since it requires a simple installation that means that it will save the buyer money because there will be no need to pay contractors or installers. It also saves the consumer money because rubber flooring for playgrounds does not require any adhesives. They are cost efficient and will save the consumer money which makes for the best of playground ideas!