|
A rubber play surface is the best option for indoor and outdoor play area flooring. It is made of resilient tire-derived recycled rubber crumb which gives them long life and long-lasting safety properties in both indoor and outdoor settings. Its tire-derived rubber composition gives rubber playset mats excellent resistance against damaging environmental factors. Rubber interlocking play tiles can be installed over a wide range of surfaces with the use of simple materials. Depending on the surface the where the playground tiles are to be installed, the ground must be prepared differently; however, a rubber play surface is easy to install with the used of connector pins.
What is the Best Material for Playsets?
The best material for playsets is recycled rubber crumb due to its long-lasting safety properties, including non-slip traction, impact absorption, and comfort. Rubber play surface tiles are made of resilient recycled rubber crumb which gives them long life in abrasive conditions. recycled rubber crumb derives from post-consumer vehicle tires that have been ground up. Vehicle tires experience harsh terrains and environmental factors daily without suffering damage – this same durability is seen in recycled rubber crumb products. Due to their vehicle tire origins, a rubber play surface made of recycled rubber crumb will resist damage caused by impacts, abrasions, and environmental factors, including UV rays, ozone, oxygen, and wet weather conditions. Rubber naturally possesses a high coefficient of friction which allows it to retain its non-slip traction when moisture is present, making them perfect for use as outdoor play area flooring where they will be subjected to precipitation. In addition to its natural traction properties, the recycled crumb rubber composition of interlocking playground tiles produces a textured surface that helps further enhance rubber’s natural traction. Furthermore, recycled rubber crumb safety mats are also designed to provide excellent impact absorption. Rubber retains a high tensile strength and a low compression set, allowing rubber playset mats to withstand heavy and repeated impacts without damage. With rubber’s high tensile strength, rubber play surface tiles will not break or tear under heavy impacts or pressure. Additionally, rubber has a low compression set that allows rubber mats for play areas provide a bounce that will offer a thick enough barrier between the force of an impact and the has subsurface. Not only will rubber’s low compression set offer excellent impact absorption, but it will also offer excellent comfort qualities. Although children may be full of energy, they can still feel fatigued, making a soft rubber surface a comfortable alternative to harder surfaces. Rubber play surface tiles are thick enough to provide enough padding to offer a cushioned surface to reduce pressure on feet, ankles, knees, and lower back area.
How Do You Prepare the Ground for a Playset?
You prepare the ground for a playset in different ways depending on the type of surface. A rubber play surface can be installed over a wide range of surfaces, such as grass, dirt, concrete, and wood. The ground will need to be prepared differently depending on the surface. For instance, hard surfaces, such as concrete and wood, do not need much preparing unless you are using glue to install the rubber playset mats. It is important to remember that glue installation can only be used on hard surfaces and cannot be used on surfaces like grass or dirt. For glue installation, you must prepare the ground by removing any debris or moisture that is present to ensure a secure application. Rocks and other large debris can break the tiles or create an uneven surface which can lead to dangerous tripping hazards. Contrastingly, there are a few more steps required in preparing grass and dirt surfaces for the installation of a rubber play surface. For both grass and dirt surfaces, it is important to use a geotextile weed barrier to prevent any plants from growing through the rubber play surface. Geotextiles are “permeable fabrics which, when used in association with soil, have the ability to separate, filter, reinforce, protect, or drain” (Wikipedia.org). You may place interlocking playground tiles directly over the grass with a geotextile layer between them. It is important to have a permeable geotextile barrier to allow moisture to drain from the surface. Dirt surfaces need to be compacted to create a flat and level surface to avoid an uneven play surface. Uneven depths of a dirt surface can create an unstable and uneven playground surface.
|
|
A rubber play surface made of recycled rubber crumb is designed to provide excellent safety and comfort properties in both indoor and outdoor playgrounds. Rubber safety mats will efficiently absorb the force of impact and provide traction to ensure safety when children are playing. Its tire-derived recycled rubber crumb composition gives rubber mats for play areas long life in the face of impacts and damaging outdoor environmental factors. While they are durable enough to stand up well against abrasive conditions, they are also soft and buoyant enough to provide excellent comfort qualities. Rubber playset mats can be installed over indoor and outdoor surfaces, including concrete, wood, grass, and dirt, with simple preparation steps to ensure a flat and even surface.
What is the Best Material for Playsets?
|
|
|